Welcome to Strong Lumen Opto Co.,Ltd.
EN / CN
You are here:Home >> Products >> LED PANEL LIGHT >> Sidelit Panel T... >> 150lm/W

Products

Products

Contact Us

Address:

Building L,

Licheng Technology Industrial Area,

Xinhe Road,Shenzhen,China


Contact Person:  Mr. LED

E-mail: info@stronglumen.com

Tel: +86-755-23221770

Welcome your inquiry, we will reply you within 24 hours.

150lm/W

150lm/W (Normal Panel Light)

150LM/W LED Normal Panel Light
  • TypeName:SL-PLE606025-X-T, SL-PLE626225-X-T, SL-PLE301225-X-T, SL-PLE601240-X-T, SL-PLE601250-X-T
  • Specifications: SAA TUV CE L70B50  LM80

  • 150LM/W LED Normal Panel Light

    Performance Parameters
    ● Luminance Efficacy: Frosted Cover:150LM/W
    ● Power Consumption:25W / 40W / 50W
    ● Input Voltage:AC200~240V
    ● Color Temperature:3000~6500k
    ● Beam Angle: 120°
    ● Operation Temperature: –20℃~40℃
    ● Storage Temperature :-20℃ to +60℃
    ● LED Type: 2835 LED
    ● Lifespan: >50,000hours
    ● Driver Type: Isolation Driver
    ● IP Code : IP20
    ● IK Code  : IK01
    ● Operating Humidity  : < 85%

    Product Feature

    1. Profile aluminum heat dissipation joint design, can effectively dissipate the heat in the lamp body, reduce light decay. Work 50000 hours. The luminous flux can still maintain above 80%. Beautiful design.

    2. Good light quality. No ultraviolet and thermal radiation, low light decay, no stroboscopic, is a typical green light source.

    3. Safe operation and wide voltage range. It won‘t damage easily. The waste can be recycled without pollution.

    4. High safety factor. Low power consumption and low calorific value. There is no potential safety hazard.

    5. Stable performance, low maintenance rate, strong versatility, convenient installation and space saving.

    6. Use environment: Hotel, factory, office, etc.

    Product Dimensions

    Model L(mm) W(mm) H(mm)
    SL-PLE301225-X-T 295 1195 10
    SL-PLE606025-X-T 595 595 10
    SL-PLE626225-X-T 620 620 10
    SL-PLE601240-X-T 595 1195 10
    SL-PLE601250-X-T 595 1195 10

    “SL” indicates Strong Luming Optoelectronics Co., Ltd
    “P” indicates panel light.
    “A” indicates out of the way of light: L=side-lit panel, B=backlit panel.
    “E” indicates Certification Type: E=CE TVU.
    “BCDF” indicates product dimensions: 6060=595*595mm, 3012=295*1195mm, 6262=620*620mm, 6012=595*1195mm.
    “GH” indicates product power: 25=25W 36=36W 40=40W 50=50W
    “X” indicates product CCT: A=2700KN=3000KL=4000KC=5000KK=5500KW=6000K-6500KM=Double CCTH=Three CCT.
    “Y” indicates the Luminance Efficacy: N= ≤100LM/W, H=110-120LM/W, T=140-150LM/W, P=170-180LM/W, S=190-200LM/W, R=220-230LM/W.

    Product structure chart

    Product technical parameters


    Model Light effect(lm/w) Luminous flux Power(W) CCT(K) CRI(Ra) Life(h) Dimming mode IP Grade Applicable temperature
    SL-PLE301225-X-T 150 3750 25 3000~6500 >80 50000

    1. No dimming 2. Silicon controlled dimming 3. 0-10V  dimming 4. Dali dimming

    IP20 Operating temperature and range:-20~40°C ≤85%RH
    SL-PLE606025-X-T 3750 25
    SL-PLE626225-X-T 3750 25
    SL-PLE601240-X-T 6000 40
    SL-PLE601250-X-T 7500 50


    Installation method

    1.Embedded:The installation environment requires that the ceiling has a standard size ceiling or keel. To install it, you only need to remove the ceiling at the corresponding position, and then replace it with the corresponding panel light. No additional installation accessories are required.

    Installation environment requirements, snap springs embedded, opening holes in the ceiling, the size of the opening is small rain panel lamp size, and then rely on the elastic force of the spring to attract the lamp to the ceiling (as shown above)I

    2.Ceiling mounted:Installation environment requirements, the height of the storey is high, the ceiling is keel or solid wall structure, and the lamp is suspended in the room by the suspender (as shown in the above picture)

    3.Ceiling type:

    1.Determine the location of the lamp to be installed, directly screw on the screw, and fix the aluminum adapter frame on the cement roof.

    2.Connect the wires internally and make sure the power is on

    3Place the lamp body in the aluminum frame

    4.The whole lamp is installed, the overall appearance is elegant, the whole thickness is about 4cm

    Packing diagram

    1. Commercial packaging

    Model Carton Box(mm) N.W.(Kg)/PCS G.W/(Kg)/Carton PCS/Carton
    SL-PLE301225-X-T L*W*H=1285*135*400 2.3 15 6
    SL-PLE606025-X-T L*W*H=658*135*700 2.4 15.6 6
    SL-PLE626225-X-T L*W*H=710*135*725 2.6 16.8 6
    SL-PLE601240-X-T
    L*W*H=1285*135*700 4.8 21.2 4
    SL-PLE601250-X-T L*W*H=1285*135*700 4.8 21.2 4

    Photometric Data
    Case

  • *

    *

    *