Welcome to Strong Lumen Opto Co.,Ltd.
EN / CN
You are here:Home >> Products >> LED PANEL LIGHT

Products

Products

Contact Us

Address:

Building L,

Licheng Technology Industrial Area,

Xinhe Road,Shenzhen,China


Contact Person:  Mr. LED

E-mail: info@stronglumen.com

Tel: +86-755-61551771

Welcome your inquiry, we will reply you within 24 hours.

LED PANEL LIGHT

LED Panel light PLE3030

 LED Panel Light
  • TypeName:LED Panel Light
  • Model: SL-PLE3030
  • Specifications: SAA TUV CE LM79  LM80

  • PLE3030 LED Panel Details

    Performance Parameters
    ● Luminance Efficacy: Frosted Cover:100lm/w.  120lm/w.  130lm/w.
    ● Input Voltage:AC185-265V
    ● Power Consumption: 16W
    ● Color Temperature: 3000K± 200K  4000K± 250K  5000K± 300K  6000K± 400K
    ● Beam Angle: 120°
    ● Operation Temperature: -10~40℃ 
    ● Storage Temperature :-20℃ to +85℃
    ● LED Type:2835 LED,4014LED
    ● Lifespan: >50,000hours
    ● Driver Type: Isolation Driver
    ● IP Code : IP20
    ● IK Code  : IK01
    ● Operating Humidity  : 10-80%

    Main Driver Parameters

    Power

    Input Voltage

    Output Voltage

    PF

    Certificate Requirement

    Flicker or Flicker free

    Dimming Type

    16W AC185-265V 27-42V/410mA >0.9 Optional Optional SCR dimming
    0-10V dimming
    2.4Gwireless
    dimming
    DALI dimming
    DMX dimming
    Drawing of Products


    1. All dimensions are in millimeters.
    2. The tolerance for all dimensions is ± 0.5mm, unless otherwise specified.

    Product Features
    ● Eye protection without glaring.
    ● TUV/CE certified high quality driver.
    ● Perfectly designed radiator.
    ● Suitable for all kinds of dimming control.
    ● A variety of installation methods (suspended, recessed, surface mounted).
    ● High transparant light guide plate.
    ● No dark areas, no white spots, no light flashes.
    Photometric Data
    Installation

    Step 1:  Fasten 4 jump rings on the panel with screws and nuts;
    Step 2: Connect the AC input wire of the driver to the electric supply and then connect the driver with the connector of the lamp;
    Step 3: Insert the jump rings into the pre-opened hole;
    Step 4: The installation is finished.
     
    Step 1: Fix two ceiling angle irons on the ceiling with the expansion pipe and screws;
    Step 2: Connect the AC input wire of the driver to the electric supply and then connect the driver with the connector of the lamp;
    Step 3: Fix the lamp on the ceiling angle iron with screws and nuts;
    Step 4: The installation is finished.

    Step 1: Lay the frame flat;
    Step 2: Place the lamp flat in the frame;
    Step 3: Use the original fine wire of the ceiling to pass through the corner holes of the lamp to fix the lamp;
    Step 4: Connect the AC input wire of the driver to the electric supply, and then the installation is finished.

    Step 1:Insert the steel wire rope into the corner hole of the lamp;
    Step 2: Fix the 4 steel wire fasteners on the ceiling, thread the steel wire rope into them, and adjust the height;
    Step 3: Install the underneath components;
    Step 4: The installation is finished.

    Step 1: This installation way must be equipped with a corner brace connection with a reverse function;
    Step 2: Connect the AC input wire of the driver to the electric supply;
    Step 3: Insert the curved part of the lamp into the keel;
    Step 4: The installation is finished.
    Packag


    Inner Carton Outer Carton Quantity Single N.W. Net Weight Gross Weight Container Quantity
    20′ 40′ 40′ HQ
    L325*W36*H380 MM L390*W197*H340MM 5PCS 5KG 4.68KG 5KG 4620PCS  9900PCS  1320PCS

    Case









  • *

    *

    *